incl. VAT più Costi di spedizione
SHIN YO Resistenza di potenza 25 W- 8,2 Ohm con cavo, coppia
incl. VAT più Costi di spedizione
SHIN YO Resistenza di potenza per lampeggiatore LED
Quando si montano i lampeggiatori LED, possono verificarsi problemi con la frequenza di lampeggio, a seconda del relè del lampeggiatore installato. Queste resistenze offrono un rimedio efficace, in quanto simulano una potenza di circa 17,5 watt a 12 V.
Dati tecnici: 8,2 ohm 25 watt
Ampiezza fornita: 1 coppia
Nota: Le resistenze devono essere sempre collegate in parallelo.
| compimento | 10 Ohm, 6,8 Ohm, 7,5 Ohm, 8,2 Ohm |
|---|---|
| marchio del prodotto | SHIN YO |
| marca del veicolo | UNIVERSAL |
The power indicated by them is less than that of the new indicator.
This could lead to problems when connecting to your vehicle.
If you have the option to replace the turn signal relay, we recommend that you use one of our load-independent turn signal relays.
If you are stuck, then we would be happy to hear from you.
Why?
It is possible that when you install your new turn signal, the flashing frequency no longer fits or an error code appears in the cockpit.
Solution:
1. Enter here the original flasher power (in watts). You will then receive a suggestion for a suitable* resistor that fixes the described problem.
2. or use one of our load-independent flasher relays.
Performance of the new turn signal
Watt
Performance of their original turn signal
Watt
* This is a calculated suggestion. In individual cases, there may be minor deviations.
