9,95 €
incl. VAT plus Koszty wysyłkowe
Rezystor z przewodem przejściowym do tylnych świateł LED, płaska wtyczka 6,3 mm do np. BMW R 1200 GS
18 w magazynie
incl. VAT plus Koszty wysyłkowe
Opornik SHIN YO
e np. do BMW R 1200 GS
W tym przewód adaptera z płaską wtyczką 6,3 mm do gniazdek okrągłych 3,5 mm. Do motocykli z systemem CAN-Bus. Te zwykle pokazują się naPodłączenie tylnych świateł LED do awarii w kokpicie. Dlatego między oryginalną wiązką przewodów a tylną lampą LED musi być podłączony rezystor.
Dane techniczne: 5 Watt 27Ohm
Zakres dostawy: 1 sztuka
| Manfacturer | Model | Chassis number | Built from | Built to | |
|---|---|---|---|---|---|
| BMW | R 1200 GS | R12/K25 | 2004 | 2007 | Show more parts |
| BMW | R 1200 GS | R12/K25 | 2008 | 2008 | Show more parts |
| BMW | R 1200 GS | R12/K25 | 2009 | 2009 | Show more parts |
| BMW | R 1200 GS ABS, 81 KW | R12/K25 | 2004 | 2004 | Show more parts |
| BMW | R 1200 GS ABS, 81 KW | R12/K25 | 2005 | 2005 | Show more parts |
| BMW | R 1200 GS ABS, 81 KW | R12/K25 | 2006 | 2006 | Show more parts |
| BMW | R 1200 GS ABS, 81 KW | R12/K25 | 2007 | 2007 | Show more parts |
| BMW | R 1200 GS ABS, 81 KW | R12/K25 | 2008 | 2008 | Show more parts |
| BMW | R 1200 GS ABS, 81 KW | R12/K25 | 2009 | 2009 | Show more parts |
| BMW | R 1200 GS ABS, 81 KW | R12/K25 | 2010 | 2010 | Show more parts |
| BMW | R 1200 GS ABS, 81 KW | R12/K25 | 2011 | 2011 | Show more parts |
| BMW | R 1200 GS ABS, 81 KW | R12/K25 | 2012 | 2012 | Show more parts |
| BMW | R 1200 GS LC ABS, 92 KW | R12W/K50 | 2013 | 2013 | Show more parts |
| BMW | R 1200 GS LC ABS, 92 KW | R12W/K50 | 2014 | 2014 | Show more parts |
| BMW | R 1200 GS, 72 KW | R12/K25 | 2003 | 2003 | Show more parts |
| BMW | R 1200 GS, 81 KW | R12/K25 | 2010 | 2010 | Show more parts |
| BMW | R 1200 GS, 81 KW | R12/K25 | 2011 | 2011 | Show more parts |
| BMW | R 1200 GS, 81 KW | R12/K25 | 2012 | 2012 | Show more parts |
The power indicated by them is less than that of the new indicator.
This could lead to problems when connecting to your vehicle.
If you have the option to replace the turn signal relay, we recommend that you use one of our load-independent turn signal relays.
If you are stuck, then we would be happy to hear from you.
Why?
It is possible that when you install your new turn signal, the flashing frequency no longer fits or an error code appears in the cockpit.
Solution:
1. Enter here the original flasher power (in watts). You will then receive a suggestion for a suitable* resistor that fixes the described problem.
2. or use one of our load-independent flasher relays.
Performance of the new turn signal
Watt
Performance of their original turn signal
Watt
* This is a calculated suggestion. In individual cases, there may be minor deviations.
